What are the specifications of electric vehicle charging pile installation industrial router
During the installation of electric vehicle charging piles, some regulations are not very clear. First, it is necessary to ensure that the electric vehicle charging pile products are approved by the fire control quality inspection department, and second, it is installed according to the requirements of the fire protection regulations of the site. Then what are the specifications for the installation of industrial routers for electric vehicle charging piles? Let's take a look.
1.What are the specifications of electric vehicle charging pile installation industrial router
1. The overall planning of industrial router for electric vehicle charging pile is coordinated with the overall planning of the local area and urban and rural construction, and must meet the requirements of ecological environmental protection and fire safety;
2. The industrial router planning of electric vehicle charging pile should make full use of the nearby power supply system, traffic, fire safety, water supply and drainage, flood control and other public facilities, and make reasonable layout and overall arrangement for the station area, access aisle of switching power supply, water supply and drainage and flood control facilities, and access road;
3. Electric vehicle charging piles in urban areas should be close to urban traffic, not suitable for intersections of urban arterial roads and surrounding busy roads;
4. electric vehicle charging pile industrial router and government office buildings, primary and secondary schools, kindergartens, hospitals, clinics, large and medium-sized public libraries, historical sites, historical museums, large and medium-sized sports venues, movie theaters and other key or crowded commercial buildings should have a scientific and reasonable fire spacing;
5. Industrial routers should not be near potentially dangerous places. When adjacent to engineering buildings with explosion or fire risks, they must comply with the relevant regulations of GB50058;
6. It is not suitable for places with corrosive gases. When it cannot be far away, it can not be located in the leeward side of the prevailing wind direction of pollutants.
7. electric vehicle charging pile industrial router can not be located in the place of violent vibration or high temperature;
8. can not be located in low-lying and may water places;
9. The charging area of electric vehicle charging pile should have certain natural ventilation conditions;
10. some often serious humid weather areas, should have the air humidity monitoring and processing equipment and means.
11. Configure fire fighting equipment. Each charging pile should be equipped with fire fighting equipment at the appropriate position to facilitate timely fire extinguishing.
2. The role of industrial router on charging pile
The number of electric vehicles has been increasing in recent years. The main problems facing the charging pile industry are scattered charging piles, difficult for owners to find charging piles, and inconvenient management caused by scattered location of charging piles. To solve these problems, how to network these charging facilities and build charging intelligent service system becomes very important, so as to ensure good user experience and operation efficiency. Among them, the industrial router is an important part of the whole solution, which is responsible for two-way data transmission between the charging facility and the monitoring and operation center.
The above is about the "electric vehicle charging pile installation of industrial router specifications" all content, we are familiar with these specifications and standards, installation and construction process will be smooth, avoid all kinds of problems, hope to help you, thank you for reading.
